Flynnstone
Jan 19, 03:51 PM
How is it working for you?
Any problems?
Any problems?
Peyote
Dec 20, 05:58 PM
Dynamic Range was one thing I was about to mention. I don't know a lot about 35MM only scanners, but I know that when I'm looking for a flatbed scanner, I won't buy anything with a DMax under 3.4. Even 3.4 is pushing it IMHO, and really 3.8 is where it's at.
That is an often overlooked specification. It basically tells you how wide of a range of contrast it can scan. The higher the better.
That is an often overlooked specification. It basically tells you how wide of a range of contrast it can scan. The higher the better.
doucy2
Dec 11, 09:09 AM
Original Quicksilver had a very poor cooling solution with not much in the way of airflow. The original fan blew out if not mistaken. But that makes little sense in my view. I would have that fan sucking cool air from outside and blowing it across that sink into the system. Even open up a few of those holes on the back with a drill if you must its what i did. The big fan above the hard disc moves air to the outside of the unit. Also i dont know how you feel about this but i have notice manufactors are sloppy and stingy when applying the silicone compound between the cpu & sink. Make sure that CPU is coated 100% before mounting the heat sink. Also Quicksilver came with 2 fan guards on the power supply. One on the unit and one on the case. Remove one of these guards for even better flow of air. For example i had a 1.4 Merc extreme that would run all day at 1.47 after i made these cooling mods. quicksilver for the most part baths the componets in other componets heat and then sends that air across the sink out the system. Reverse that for better cooling. good luck.
he is right i now own this beast if machine and i have it running at 1.47ghz
it run quite cool, considering. Drilling the holes in the back will bring down its resale value, but if you plan to keep it it is a good option.
If you are not using and dont plan to use your pci slots i sugest, putting an out fan down there for just a little more additional cooling.
he is right i now own this beast if machine and i have it running at 1.47ghz
it run quite cool, considering. Drilling the holes in the back will bring down its resale value, but if you plan to keep it it is a good option.
If you are not using and dont plan to use your pci slots i sugest, putting an out fan down there for just a little more additional cooling.
Consultant
May 24, 05:14 PM
Perhaps google: imushroom conversion tool
=p
=p
more...
Vylen
May 5, 06:32 AM
Umm, isn't that pretty much exactly what I described in my OP? Albeit I didn't use the phrase "dynamic overclocking".
Maybe? Perhaps? Depends? :p
Doesn't matter now ;)
Maybe? Perhaps? Depends? :p
Doesn't matter now ;)
Oli3000
Apr 30, 09:20 AM
Hard to tell, but looks like a spec of dust under the screen to me.
Not possible because the MBA has no cover over the panel?
I have the same, but haven't had a chance to take mine in! 13" Ultimate with a stuck pixel. It was very saddening to find it - although actually it makes no difference to using it...
Not possible because the MBA has no cover over the panel?
I have the same, but haven't had a chance to take mine in! 13" Ultimate with a stuck pixel. It was very saddening to find it - although actually it makes no difference to using it...
more...
iSayuSay
May 6, 09:35 AM
Nice ID there OP .. IwantItToo :p
Do you game a lot? If you don�t, you better get off with base 21.5� or base 27� for screen estate
Truly, gaming is an expensive hobby. Be thankful if you hate video games, since you won�t care about how many FPS you can get from your screen
My score? No doubt 11 .. oops i mean 10
Do you game a lot? If you don�t, you better get off with base 21.5� or base 27� for screen estate
Truly, gaming is an expensive hobby. Be thankful if you hate video games, since you won�t care about how many FPS you can get from your screen
My score? No doubt 11 .. oops i mean 10
fabian9
May 4, 04:19 PM
Oh okay, I'm gonna try it now with 4.3.3.
Don't think 4.3.3 is jailbreakable yet?
Don't think 4.3.3 is jailbreakable yet?
more...
Cabbit
Apr 6, 06:11 PM
Aye we'll need to see at least the PHP script, the HTML you posted seems fine.
boxcar
Jul 6, 04:48 PM
alright... no partition!
more...
Avril Lavigne Feet
avril lavigne pouf long
more...
Avril dips her feet in the
12000 square feet and was
more...
Avril Lavigne - Things I#39;ll
Avril dips her feet in the
more...
Avril-Lavigne-Feet-102152
Avril Lavigne height is 5 feet
avril lavigne hair extensions
more...
Hansr
Apr 15, 01:55 PM
I recommend reading this: http://www.cyclismo.org/tutorial/R/ and if you want a really good guide this: http://stats.lse.ac.uk/penzer/ST419materials/
RebeccaL
Apr 4, 06:08 PM
The product that Larry reviewed can be found here: http://www.thehishop.com/
They have the back oleo protectors but the front cutout is a single opening and not separate cutouts.
As a side note, when SGP first released their oleophobic protectors they were separate cutouts and somewhere down the line they decided to switch to a single cutout (not sure why).
Thanks for the link.
Now I am confused. You say that SGP first made the oleo protectors with two cuts and then one cut.
Does the current oleos have single or double cut?
They have the back oleo protectors but the front cutout is a single opening and not separate cutouts.
As a side note, when SGP first released their oleophobic protectors they were separate cutouts and somewhere down the line they decided to switch to a single cutout (not sure why).
Thanks for the link.
Now I am confused. You say that SGP first made the oleo protectors with two cuts and then one cut.
Does the current oleos have single or double cut?
more...
Macky-Mac
Dec 5, 03:12 PM
I found that I noticed a difference on my old iMac 400 when I added a 512 RAM stick
jsw
Sep 23, 12:29 PM
AP says no. :D
Again, proving my ignorance...
"AP" is what? "Associated Press"? Or, I mean, "Associated Press?"
No, I don't - that looks like I'm using "Associated Press?" as a phrase.
I'm so confused. I think I'll just speak my posts from now on and supply the link to the audio file.
No, wait, I'll have to record them with my iSight... otherwise, I'll not be able to do the "air quotes". "Air quotes." Dammit....
Again, proving my ignorance...
"AP" is what? "Associated Press"? Or, I mean, "Associated Press?"
No, I don't - that looks like I'm using "Associated Press?" as a phrase.
I'm so confused. I think I'll just speak my posts from now on and supply the link to the audio file.
No, wait, I'll have to record them with my iSight... otherwise, I'll not be able to do the "air quotes". "Air quotes." Dammit....
more...
Matthew Yohe
Dec 27, 11:20 PM
Those settings should certainly stick. Is this running the latest 10.6 release? (10.6.5)
Maybe reboot and see if anything gets fixed.
Maybe reboot and see if anything gets fixed.
williamw
Oct 2, 06:18 PM
I'm not sure. Probably more than $345. I'm leaning more towards a trade for a touch.
I'll give $355 Shipped! [DIBS].
I'll give $355 Shipped! [DIBS].
more...
FoxMac
Oct 17, 11:56 PM
I have an old LC 575 that I'm using for mostly playing games and some word processing, no internet, though. I'm wondering if I should upgrade from 7.5.5 to 7.6 or from 7.5.5 to 8.0. I'm probably going to pick up 32mb of RAM soon, so I'm ready for any OS to be on it.
Any thoughts?
Any thoughts?
Fishrrman
Apr 26, 09:59 AM
Get an interface with AT LEAST 2 XLR inputs.
If you're consider M-Audio, I'd suggest the Fast Track Ultra as a better buy. It costs a little more, but offers you "room to grow" in the future.
Just wondering, do you have firewire capabilities as well? If so, I consider firewire to be the better choice for an audio interface.
If you start thinking of firewire, I suggest you also check out the Echo "AudioFire4" interface. A bit more expensive @$299, but worth the money.
I've been using CAD mics and have gotten very good results from them. You might check out the M-179 -- it has 3 or 4 selectable polar pickup patterns.
If you're consider M-Audio, I'd suggest the Fast Track Ultra as a better buy. It costs a little more, but offers you "room to grow" in the future.
Just wondering, do you have firewire capabilities as well? If so, I consider firewire to be the better choice for an audio interface.
If you start thinking of firewire, I suggest you also check out the Echo "AudioFire4" interface. A bit more expensive @$299, but worth the money.
I've been using CAD mics and have gotten very good results from them. You might check out the M-179 -- it has 3 or 4 selectable polar pickup patterns.
v2club
Apr 28, 07:53 PM
TextExpander and TypeIt4Me.
Not exactly what I'm looking for. For those 2 apps I need to create an abbreviations and believe me I DO NOT want to create an abbreviation for every single word in the English language. I need an app that will continue the words for me, that is all. Just like when you press the esc key on TextEdit or Pages, but I don't want to press esc all the time.
Not exactly what I'm looking for. For those 2 apps I need to create an abbreviations and believe me I DO NOT want to create an abbreviation for every single word in the English language. I need an app that will continue the words for me, that is all. Just like when you press the esc key on TextEdit or Pages, but I don't want to press esc all the time.
Jiten
Mar 9, 10:19 PM
Its a bit pricy but a friend of mine who can't seem to part with his old iBook G4 bought this:
http://eshop.macsales.com/item/Other%20World%20Computing/SSDMXLE040/
Compatible with the whole range of G3 and G4 Macs and its a sandforce based SSD so its going to perform better then those cheap SSD/Compact Flash upgrades we see online. The drive is still on its way but I'm very excited and curious on how better this will make his iBook perform.
http://eshop.macsales.com/item/Other%20World%20Computing/SSDMXLE040/
Compatible with the whole range of G3 and G4 Macs and its a sandforce based SSD so its going to perform better then those cheap SSD/Compact Flash upgrades we see online. The drive is still on its way but I'm very excited and curious on how better this will make his iBook perform.
Kobushi
Sep 19, 01:51 AM
All my AOL cd's make excellent beer coasters....
so would my wife's country ones if she'd let me get my hands on 'em. :rolleyes:
so would my wife's country ones if she'd let me get my hands on 'em. :rolleyes:
equilibrium17
Feb 10, 02:13 PM
In regards to how you die from a relatively small wound to the calf:
In fencing, it's called the "Coup de Jarnac", after a famous 16th century duel that took place in front of king Henri II of France wherein a fellow named Jarnac killed his opponent with cut to this area.
In brief, there is a vessel called the popliteal artery runs quite close to the surface along the back of the leg from just above the knee joint until it splits into the the two sural arteries a few inches below the knee. Even a relatively shallow slash or puncture wound in this area can sever this artery, and unless proper treatment is applied quickly, you can definitely bleed out from this wound; 2 hours would be plenty of time.
In fencing, it's called the "Coup de Jarnac", after a famous 16th century duel that took place in front of king Henri II of France wherein a fellow named Jarnac killed his opponent with cut to this area.
In brief, there is a vessel called the popliteal artery runs quite close to the surface along the back of the leg from just above the knee joint until it splits into the the two sural arteries a few inches below the knee. Even a relatively shallow slash or puncture wound in this area can sever this artery, and unless proper treatment is applied quickly, you can definitely bleed out from this wound; 2 hours would be plenty of time.
el greenerino
Dec 20, 05:59 AM
You could probably take what you need scanned to a service bereau, they'd probably do a better job than anything the average home user would. Just make sure they're reputable and use equipment that's better han what they use at walgreens :p
iMJustAGuy
Feb 26, 10:57 AM
The closest you can get is subscribing to threads you post in and then looking at the list in your User CP. There is no notification mechanism for individual posts and individual user's posts.
Is this any different than being in the forum and seeing the icon that shows a new post since you've posted? And I do understand the said feature is not available but it would be great to have something to the extent of simple Facebook notifications.
Is this any different than being in the forum and seeing the icon that shows a new post since you've posted? And I do understand the said feature is not available but it would be great to have something to the extent of simple Facebook notifications.
No comments:
Post a Comment